Model: 6166 Catalog ID: 6166
This clear, non-yellowing UV glue is cured with an activator instead of an expensive UV light. This makes it ideal for gluing glass to glass, even opaques, which a UV light glue can't cure. It's optically clear when it dries, which is great for glass to glass fusing, mosaics, three-dimensional stained glass and jewelry, among other applications. In addition, it's also a great for gluing metal to glass (like jewelry findings) with fast and easy cleanup. You can even use Triolyse with stone such as granite or marble.
Using Triolyse is easy - just brush a thin coating of the activator on a clean and dry surface (on rough or irregular surfaces, you should apply the activator to both surfaces). The activator remains active for 4 hours. Apply the adhesive in the center of the mating surface, lightly press the two surfaces together for about 15-30 seconds to create a bond. Clean up excess after a couple minutes. The adhesive fully cures after six hours (or as quickly as 30 minutes if you heat the parts to 150F).
Package includes 14ml of activator and 10ml of adhesive.