|
Model: 4208 Catalog ID: 4208 Fired earthenware molds for glass. Kiln casting is fun and easy! The easiest way to kiln cast with these molds is to simply fill the mold with Bullseye Glass frit or other chunks of glass. Simply prime the mold with glass separator (we use only Hotline Primo Primer in our studio) and fire. When you fire these molds at casting temperatures (about 1500 to 1550 F), the frit will melt quickly, so just let it soak for 20 to 30 minutes, then check to see if more soaking is needed. If you're new to kiln casting it is time to get EXCITED. You can easily make cabinet hardware or jewelry (pendants, bracelets, barrettes, hair combs, etc.), or you can use this mold in larger scale projects, and make kitchen and bathroom tiles!
This mold's dimensions are 1-1/2" x 1-1/2" square, tapering down to 1" x 1" at the "bottom" of each square. The depth is 1/2" deep in each cube. Total dimensions of mold is 8.5" square. The picture shown is for reference purposes, and the mold being offered is the larger of the two shown- 1-1/2" Cubes Tray 16 Squares.
|
